Our 100% electric
product series
Our innovative BEV serie stands out from all other products on the market being the first to offer 100% electric functions.
BEV series components
BODY
CAPACITIES
15,3 to 25,2 m3
(20 to 30 cu.yd)
BATTERY
LiNMC high density technology allows light weight and quick recharge (4 to 8 hours) on Type 2 charging station. 240 VAC compatible J1772. Powered heat pads are installed in the battery pack to maintain the battery at its best working condition and temperature.
AUGER COMPACTION
4,6 m3/min (6 cu.yd/min) drive by unique planetary mechanism design to maximize compaction and develop 30800 Nm (22 600 lbs/ft) torque on refuse. Automatic torque and speed control allows
collection of garbage, recycling material and organics, without destroying material and avoiding packing jam. The tapered screw allows a 3 phases compaction of the material, radial compaction and axial compaction into the auger area followed by the final compaction phase inside the body.
TAILGATE
CAPACITIES
0, 2,4 m3 or 4,6 m3
(0, 3 and 6 cu.yd)
HOPPER
CAPACITY
2,3 m3 (3 cu.yd)
HOPPER FLOOR
9 mm (3/8 in.) abrasion resistant steel with 400 HB of hardness.
AUTOMATED
ARM (Patent pending)
Close grab, no swing out, 3 m (10 ft) reach for bins 120, 240 and 360 liters (30, 60 and 90 gallons)
with a lifting capacity of 350 kg (750 lbs). All 3 functions are powered by PMDC electric motors and gearbox combination for a cycle time of less than 10 seconds.
PACKTHROUGH
EJECT PANEL
(patent pending)
The patent pending concept allows
packing trough the front
wall of the body and unload with an eject panel driven by PMDC motor, planetary and chains. The
system has a moving shutter that closes the packer opening to prevent garbage from falling back behind the ejector while the unloading operation.
